
The most common shoe cover mistake in a washdown area is a nonwoven cover. After all, it looks right and it is easy to issue. But nonwoven is a breathable fabric, and it offers no liquid protection. On a wet floor, the water reaches the shoe.
Pinnacle Protection Enterprises supplies three disposable shoe covers: nonwoven, PE and CPE deluxe. Each one also has its own place on a cleaning contract. This article shows where each cover fits and what to write into the specification, so the right cover reaches the right floor.
The Three Covers at a Glance
| Cover | Material | Liquid protection | Sole | Best for |
|---|---|---|---|---|
| Nonwoven | Spunbond polypropylene, breathable | None | Fabric | Dry floors, visitors, dirt and dust control |
| PE | Polyethylene film, 20 or 30 micron, heat-sealed seams | Completely waterproof | Smooth plastic | Damp floors, splashes, light-duty wet work |
| CPE deluxe | CPE upper on a 9g polypropylene nonwoven sole | Upper protects against water-based liquids | Nonwoven with an anti-skid finish | Wet floors and washdown areas |
Nonwoven Shoe Covers: Keep them for dry areas
Pinnacle’s nonwoven shoe cover is spunbond polypropylene, in white or blue. Because of its elastic ankle band and loose fit, it goes on and comes off quickly. It is also light and breathable, which suits visitors and staff walking through clean areas.
However, it gives no protection against liquids. Consequently, water passes through to the shoe in a washdown area or on a freshly mopped floor.
For this reason, specify nonwoven for dry floors, reception and office areas, and visitor routes that stay dry. It comes in packets of 100, with 20 packets per carton.

PE Shoe Covers: Waterproof for light-duty wet work
The PE shoe cover is blue polyethylene film in 20 or 30 micron. The seams are heat sealed, so the cover is completely waterproof. In addition, an elastic ankle band gives a one-size-fits-most fit, and the film is lint-free.
PE suits damp floors, occasional splashes and short walks through wet areas. Even so, it is a light-duty cover. A smooth plastic sole is a poor match for a floor that stays wet for the whole shift, so PE is the wrong choice for a washdown area.
State the thickness on the order. The 20 micron cover is the standard for light-duty use, and 30 micron is the heavier option where covers wear through before the task ends. Both come in packets of 100, with 20 packets per carton.
CPE Deluxe Shoe Covers: The one for wet floors
The CPE deluxe pairs a CPE upper with a 9g polypropylene nonwoven sole. The upper protects against water-based liquids, and the sole has an anti-skid finish. A double-stitched elastic strap holds the cover at the ankle.
As a result, that combination makes it the cover to specify for wet floors and washdown areas. The upper keeps splashes off the shoe, and the sole has an anti-skid finish where a PE cover has smooth plastic.
It is one size fits most, packed 100 per packet and 10 packets per carton.
Anti-skid is a feature, not a guarantee. The finish on the sole helps, but it does not make a wet floor safe. Keep wet-floor signs, drying and housekeeping in place, and check that the shoes underneath suit the conditions. The UK Health and Safety Executive’s slips and trips guidance covers the wider controls.

What to Put in the Specification
A shoe cover specification fits on one line per area. Cover these points:
- Area. Dry, damp or washdown. This decides the material.
- Material. Nonwoven for dry areas, PE for light-duty wet work, CPE deluxe for wet floors and washdown.
- Thickness. For PE, name 20 or 30 micron.
- Fit. Try the cover on the largest shoe it must fit, including work boots.
- Chemicals. Water resistance is not chemical resistance. If floors are cleaned with concentrated chemicals, ask Pinnacle before you approve a cover for that area.
- Change rule. A new pair each time someone enters the area, and a new pair when a cover tears.
- Documents. Download the data sheet from each product page for your PPE file.
Shoe covers are one part of wet-work PPE. Our guide to waterproof disposable PPE for wet environments covers coveralls, aprons, sleeves and gloves.
Making it Simple for Cleaning Teams
Cleaning contracts run on high staff turnover. New starters pick up whatever is in the store room, so the specification has to survive that. Two habits help.
- Store each cover where it is used. For example, keep CPE deluxe at the entrance to washdown areas and nonwoven at reception.
- Name the cover on the site’s PPE list. “Shoe covers” leaves room for a guess. In contrast, “CPE deluxe shoe covers, wet areas” does not.
Pinnacle’s free Cleaning Contract PPE Kit List sets out the full kit for a cleaning contract, including which shoe cover to issue where.
Ordering from Pinnacle PPE
All three covers are in the disposable shoe covers range in the online store. Pinnacle inspects every batch before dispatch and then delivers nationwide via The Courier Guy. Gauteng orders arrive in 1 to 2 business days and major centres in 2 to 4. Finally, the minimum order is R500 including VAT.
The how to order online guide walks you through the process. For help choosing a cover for a specific site, contact the Pinnacle PPE team.
Pinnacle Protection Enterprises is a South African importer, manufacturer and distributor of disposable PPE and hygiene consumables, trading for over 20 years.
